English
Our SKRD50 series radar level transmitter adopts 6.8GHz transmission frequency technology. It measures media with a dielectric constant above 1.8, with a max range of 30 m and resolution of 1 mm, and stays unaffected by density, viscosity, temperature, vapor, or vacuum conditions.
The series covers six models, SKRD51 through SKRD56, for applications from simple storage tanks to blast furnace level measurement, with process temperature up to 250°C standard (500°C on the blast furnace model, SKRD56) and 2-wire loop-powered 4-20mA output. Send us your medium, tank type, and process conditions, and we will recommend the right model.
Application: Suitable for low dielectric constant media and liquid tank with stirring.Max. range: 20mProcess connection: FlangeProcess temperature: -40~250°CProcess pressure: -1.0~20MpaAccuracy: ±10...
Application: Process condition is simple, corrosive liquids, slurries and solids level measurement. For example: Water tank Acid and alkali tanks, slurry tanks, solid granules small petrol tanks level...
Application: Storing corrosive liquids, slurries and solids level measurement, For example: Water tank, Acid and alkali tanks, Slurry tanks, Solid granules ,Small petrol tanks Max. range: 20mProcess c...
Application: Suitable for all kinds of storing tanks or process measuring environment, liquids, slurries and solids.For example: Crude oil, light oil tank Coal and powder coal bunkers Volatile liquid ...
Application: Suitable for small range powder, particles, blocks level measurement, for example: run coal bin, raw coal silo, coke silo.Max. range: 30mProcess connection: Gimbal FlangeProcess temperatu...
Application: Suitable for blast furnace level measurement, can be used with thick tank top or long installation pipe.Max. range: 30mProcess connection: FlangeProcess temperature: -40~500°CProcess pre...
SKRD50 series radar level transmitter adopts 6.8GHz transmission frequency technology; it is a kind of non-contact and continuous level measurement device. SKRD 50 series radar level transmitters output 4-20mA analog signals; the max level range it can detect is 30m; can be used to measure level of storage tank, buffer tank or process tank.
✔ Advanced none-contact measuring technology
✔ Stable material is chased
✔ Can measure level of liquid and solids
✔ Can measure the media whose dielectric constant is >1.8
✔ Measuring range 0-20m (30m is possible)
✔ 2 wires, Loop powered, power supply and output signal using the same cable
✔ 4~20mA output
✔ Resolution 1mm
✔ Free from noise, vapor, powder, vacuum effect
✔ Can not be affected by density, viscosity and temperature
✔ Max. Process pressure 4Mpa
✔ Max. Process temperature 250°C
