SILVER AUTOMATION INSTRUMENTS LTD.

Introduction of SHD-SE11 Electromagnetic Flow Meter, Magnetic Water Meter

General Introduction of SHD-SE11 Electromagnetic Flow meter

Silver Electromagnetic Flow meter is perfect to measure conductive liquid, grout and slurry.

This Flow meter is accurate measuring, no pressure loss and no moving or extruding parts, wear and corrosive resistance, can be installed in any pipelines.

This kind of flow instruments can be used in Chemical, Pharmacy and cosmetic fields, Municipal water supply, sewage plant, food and paper factory.

Electromagnetic Flow meter Design

Electromagnetic Flow meters Transmit and measure the flow, volumetric flow of conductive liquid, slurry.,ect.

Electromagnetic Flow meter measuring system consists of a converter and a mag flow sensor, flow sensor is installed in the required pipeline, while converter can be installed in the field or other place (that is remote Version).If it is compact design, sensor and converter integrally constructed.

Sensor and Converter

Compact Type Magnetic Flow meter

Remote Type Magnetic Flow meter

Compact Type Magnetic Flow meter

Remote Type Magnetic Flow meter


SHD Series Magnetic Flow meter Technical Specifications and Technical Parameters

Normal Operating Conditions

Environment temperature:-25°C~ + 60°C;

Relative Humility: 5% ~90%

Power supply: 85VAC~250VAC; 16VDC~36VDC

Consumed power: less than 20W

Magnetic water meter Measuring Accuracy

Standard SHD-SE11/ Sanitary SE13:±0.5%;High Accuracy SE12 series Mag meter :±0.25%  Inserted type SE 14 type mag meter :±1.5%

Flow meter Measuring ErrorFlow meter Measuring Error

Electromagnetic flow meter Analog Current Output

Load Resistance: 0mA~10mA, 0 k Ω~1.5 K Ω

Load Resistance: 4mA~20mA, 0 k Ω~750 Ω

Intrinsic Error: o.1&%±10μA

Electromagnetic Flow meter Digital Frequency Output

Frequency Output Range: 1 Hz ~ 5000 Hz

Output Electrical Isolation: Optoelectronic Isolation, Isolation Voltage: > 1000VDC

Frequency Output Driver: Field-Effect Tube Output, Max bearing Voltage 36VDC, Max load Current 250mA

Magnetic meter Digital Pulse Output

Output Pulse Range: 0 pulse/second ~ 100 pulses /second. (Higher than 100 pulses/second, pulse can be lost)

Scaled Output Pulse: 0.001 m3/cp~1.000 m3/cp; 0.001 LTR/cp ~1.000 LRT/cp

Output Electrical Isolation: Optoelectronic Isolation, Isolation Voltage: > 1000VDC

Frequency Output Driver: Field-Effect Tube Output, Max bearing Voltage 36VDC, Max load Current 250mA

Mag water meter Alarm Output

Alarm Output Point: ALH –Upper limit Alarm, ALML—lower limit Alarm

Output Electrical Isolation:  Optoelectronic Isolation, Isolation Voltage: > 1000VDC

Frequency Output Driver: Field-Effect Tube Output, Max bearing Voltage 36VDC, Max load Current 250mA

Magnetic flow meter Digital Communication

MODBUS Interface: RTU Format, Physical Interface RS-485, Electrical Isolation 1000VH

Hart Protocol Interface: Standard Hart Protocol configures HART Communicator, can display the measuring flow valve on line and modify the flow instruments technical parameters.

Forbidden on Electromagnetic Flow meter

Forbidden:

Using Flow meter as elastic compensating parts, For example to compensate pipe deviation, pipe vibration and pipe expansions.

Using Magnetic Flow meter as a support to climb, for example: using as assembly purpose.

Using Mag water meter as an external load support, For example: to support pipeline.

Drawing on SHD-SE11 magnetic flow meter name plate or welded other parts into our instruments

Remove some material, for example, drilling in the flow meter instruments housing

Repair, alteration, and expanding and using spare parts are only processed according to the manual book.

Other operations must be allowed from our factory. Or carrying out these operations in the place where is authorized from our factory.

Any problem raised from operations without our factory authorization will not bear by the manufacture, all the operation and maintenance requirement


Related Articles