SILVER AUTOMATION INSTRUMENTS LTD.
Product Category

4 inch Magnetic flow meter

4 inch Magnetic flow meter

  • GPRS Electromagnetic flow meter

    GPRS Electromagnetic flow meter

    Battery powered electromagnetic flow meter has a lithium battery which can work for 36-72 months, it has built-in GPRS/G...

  • 12 Inch magnetic flow meter

    12 Inch magnetic flow meter

    Electromagnetic flowmeter is a flow metering device that performs volumetric flow rate measurement according to Faraday'...

Electromagnetic flowmeter is based on Faraday's law of electromagnetic induction. It is used to measure the volumetric flow of conductive liquid with conductivity greater than 5μS/cm. In addition to measuring the volume flow rate of general conductive fluids, it can also be used to measure the volumetric flow rate of strong corrosive and aggressive liquids such as strong acid and alkali, and uniform liquid-solid two-phase suspension liquids such as mud, slurry and pulp. 4” Mag flow meter is widely used and requested. Silver Automation instruments supply low price cost DN100 electromagnetic flow meter with fast delivery time and reliable quality.

Magnetic flow meter features

Extremely resistant to erosive liquid, can measure any conductive acid and alkali,such as hydrochloric acid, nitric acid, Caustic Soda,hydrofluoric acid,etc
Strong anti-interference ability, almost free from external interference
Measurements are not affected by changes in fluid density, viscosity, temperature, pressure, and conductivity
There is no requirement for non-flow-blocking parts in the measuring tube and straight sections without pressure loss.
Can take flow rate measurement of slurry and pulp
There are no moving parts in the measuring tube, no flow blocking parts, and there is almost no additional pressure loss in the measurement.
With self-test and self-diagnosis

4 inch Electromagnetic flow meter technical specifications

Mag flow meter sensor size: 4”, 100mm
Flow range: 12~240 m3/h,53~1056 GPM
Output: 4~20mA, pulse, frequency
Power supply: 24VDC, 220VAC,battery
Communication: HART, RS485(MODBUS RTU), Profibus-DP
Process connection: flange
Electrode material option: 316L electrode (standard); HB/HC alloy electrode; titanium electrode; tantalum electrode; tungsten carbide electrode; platinum electrode
Lining material: Ruber,PTFE,PFA,F46
Measurement ratio: 20:1
Working environment: sensor -25-60 ° C; magnetic flow meter converter: -10-60 ° C (≥ 80 ° C to be customized)
Fluid requirements: conductive medium (conductivity ≥ 5μs / cm liquid)
Leave a Message Email Us

we will contact you within 24 hours.

DMCA.com Protection Status