Product Category

Flow meter for polymer

Flow meter for polymer

  • Low flow high viscosity flow meter

    Low flow high viscosity flow meter

    Oval gear flow meter and Coriolis mass flow meter are both suitable instruments for low flow and high viscosity flow rat...

  • Chemical Flow Meter

    Chemical Flow Meter

    Chemical flow meters are intended to measure non-corrosive or corrosive liquid and gas, for example pesticides, detergen...

What is polymer flow meter?

Polymer or Polymeric solution flow measurement for industry is not an easy job. Polymer flow meter could run at very low flow rate, such as within 100 LPH, polymer flow sensor could run at very high viscosity such as around 1000 cp , and the pipeline is also small, such as 1/4” or 1/2 inch. However Coriolis flow meter is an excellent flow measurement device and system for Polymer, Polymeric solution, polymer-based chemical element.
Coriolis mass flowmeter is a direct mass flow measurement device, which is based on the principle of Coriolis. It can directly measure the mass flow of the polymer in the pipeline with high accuracy.

Why can be polymer flow meter?

High viscosity polymer flow meter
Coriolis flow meter can measure viscous liquid, the viscosity can be as high as 200,000 mPa.s. Polymer solution could be around 1000 mPa.s, so Coriolis flow meter can be used as polymer flow meter. While for turbine flow meter, magnetic flow meter or Vortex flow meter, few flow technologies can handle this.
Micro and small flow rate flow meter
polymer liquid pipeline could run at small flow rate, some are smaller than 100LPH or within 100 kg/h, not all flow meters can detect that low flow range . Coriolis flow meter sensor size can start from 1/6 inch which can take mass flow measurement low to 40 kg/h. Below we list the table list for your reference:
  • 1/6” polymer flow meter :  max flow : 40kg/h
  • 1/4 inch polymer flow meter: max flow range: 100 kg/h
  • 8mm polymer flow sensor: 0~200 kg/h
  • 10mm polymer flow transmitter: 0-0.5 ton/h

Digital polymer flow meter
Industrial polymer flow meter is with digital indicator to show flow rate and total flow of Polymer or polymeric solution. Besides that it can have 4-20mA , pulse for various process control or dosing purpose. Coriolis flow meter also has MODBUS RTU for advanced industrial control.

Specifications of polymer flow meter

  • Sensor size available: 3mm, 1/4”, 3/8”,1/2”,1”,1.5”,2”,3”,4”,6” ,8 and 10 inches
  • Power supply: 24V DC or 220V AC
  • Output and communication: Pulse, 4-20mA,HART, RS485
  • Pressure rating, ANSI 150LB, ANSI 300LB, ANSI 600LB, ANSI 900 LB, high pressure flow meter
  • Wet parts material for flow sensor: SUS 316L
  • Parameters can be detected by Coriolis flow meter: flow rate, total flow, density, concentration value
  • Process connection: thread, flanged, tri-clover

Leave a Message Email Us

we will contact you within 24 hours. Protection Status