SILVER AUTOMATION INSTRUMENTS LTD.
Product Category

1 inch magnetic flow meter

1 inch magnetic flow meter

  • 1 inch mass flow meter

    1 inch mass flow meter

    1 inch mass flow meter refers to the mass flow meter sensor size 25mm (1 inch).How 1 inch mass flow meters work?I inch m...

  • 1 inch Coriolis flow meter

    1 inch Coriolis flow meter

    What is 1 inch Coriolis flow meter &principle1 inch Coriolis flow meter means DN25sensor size Coriolis mass flowmeter. T...

What is 1"electromagnetic flow meter?

I inch magnetic flowmeter refers to the sensor size of the electromagnetic flowmeter is 1 inch, 1”, DN25 or 25mm.

How does a 1 inch mag meter work?

1 inch magnetic flowmeter is suitable for flow detection of various conductive liquids in many industries. 1” Electromagnetic flowmeter is based on the measurement principle of Faraday's law of electromagnetic induction.
The 1 inch mag flow sensor is not directly immersed in liquid; there are no moving parts, so there is no wear problem. 1” mag flowmeter measures volumetric flow rate, which means that the measurement is not sensitive to changes in fluid density, temperature, pressure, and viscosity.

Applications of 1 inch magnetic flow meter

Electromagnetic flowmeter is used to measure the volume flow of various conductive liquid media such as acid, mud, paper pulp, etc. DN25 magnetic flow meter is widely used in chemical fiber, food, paper, sugar, mining and metallurgy, water supply and drainage, environmental protection, steel, petroleum, pharmaceuticals and other industrial fields, 1 inch magnetic flow meter is used to measure various acids, alkalis, salt solutions, mud, mineral pulp, paper pulp, coal Water slurry, corn syrup, sulfuric acid, hydrochloric acid, chloric acid, hydrofluoric acid, sodium hydroxide, phosphoric acid, ferric chloride, sodium cyanide, potassium hydroxide, ammonium hydroxide, barium hydroxide, syrup, lime milk , Sewage, raw cooling water, water supply and drainage, brine, hydrogen peroxide, beer, wort, various beverages, black liquor and other conductive fluid volumetric flow rate.

Specifications of 1 inch electromagnetic flow meter

  • Sensor size: DN25, 1 inch or 1”
  • Flow velocity for 1 inch magnetic flow meter: 0.5~ 10 m/s
  • Suitable for liquid with conductivity greater than 5μs/cm.
  • Flow range for 1 inch magnetic flow meter: 10-200 L/min, 2.64-52.8 GPM
  • Process connection for 1 inch magnetic flow meter: Thread 1”NPT or 1” BSP, tri-clamp, flange 1” ANSI, 150LB, 300LB. JIS 10K, DN25, PN25, PN40.etc
  • Wet parts in contact with the liquid have good corrosion resistance and wear resistance: PTFE or PFA liner
  • No moving parts inside the DN25 magnetic flow meter sensor, no pressure loss
  • 1” magnetic flow meter has LCD display to directly read liquid flow rate, flow velocity and total flow
  • Bi-direction flow meter which can detect liquid forward and reverse flow rate, the display can also indicate forward and reverse flow.
  • Parameters can be configured through one inch magnetic flow converter easily
  • Digital 1 inch flow meter which can have pulse, frequency, 4-20mA, RS485, Hart and Modbus , PROFIBUDS-DP communication signal output
  • I inch magnetic flow meter is with low price cost starts from 400 USD dollars ($).

Leave a Message Email Us

we will contact you within 24 hours.

DMCA.com Protection Status